Showing all 16 results

  • Schneider Circuit Breaker, EasyPact EZC250N, TMD, 250A, 4 Poles 3D

    0 out of 5
    ₦0

    Description

    EZC250N4250

    This is a 250A circuit breaker for EasyPact EZC250N. This product can work below rated operational voltage(Ue) 550VAC at 50/60Hz or 250VDC network. The ultimate breaking capacity(Icu) is shown differently, depended on the condition of network, Ics=50%Icu if need to match. This version of product is designed 4 poles frame with detection on 3 poles, equiped TMD trip unit for thermal-magnetic protection. It is compliance with standard IEC60947, CE certification and some independent lab(KEMA,ASEFA,TUV) or third-party Tilva. This device is certified for operation in pollution degree III environment as defined by IEC60947, and pass the test of extremely atmospheric conditions. Device can be mounted vertically or horizontally in a metal enclosure, and against from safety risk by padlocking. The degree of protection is IP40 for direct rotary handle, and IP54 for extended rotary handle. This series have slots used for indication or voltage release auxiliaries positioning , depending on where it is inserted in the device behind the front cover of circuit breaker. The fixed dimension is 140mm(width),165mm(height),68mm(Depth).

    • New modern look & feel of all machines
    • Easier to install and operate with multi-standard screws
    • Improved fire resistance with IEC 60335-1(Clause 30.2) certificate by authorised agency
    • Anti-flammable refrigerants with IEC/EN/UL 60335-2-40(Annexe JJ) certificate by an authorised agency
    • Digital customer experience for technical documents

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Contactor, TeSys Deca, 3P (3 NO), AC-3/AC-3e, <=400V, 40A, 230V AC 50/60Hz coil, screw clamp terminals

    0 out of 5
    ₦0

    Description

    TeSys D contactor, 3 poles (3NO), for motor control applications up to 40A/440V AC-3/3e (18.5kW@400V). It provides a 230V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connection by EverLink BTR screw connectors, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (55mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
    • New modern look & feel of all machines
    • Easier to install and operate with multi-standard screws
    • Improved fire resistance with IEC 60335-1(Clause 30.2) certificate by authorised agency
    • Anti-flammable refrigerants with IEC/EN/UL 60335-2-40(Annexe JJ) certificate by an authorised agency
    • Digital customer experience for technical documents

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Contactor, TeSys Deca, 3P(3 NO), AC-3/AC-3e, <=400V, 65A, 230V AC 50/60Hz Coil, Screw Clamp terminals

    0 out of 5
    ₦0

    Description

    TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 65A/440V AC-3/3e (30kW@400V). It provides a 230V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connection by EverLink BTR screw connectors, and control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (55mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
    • New modern look & feel of all machines
    • Easier to install and operate with multi-standard screws
    • Improved fire resistance with IEC 60335-1(Clause 30.2) certificate by authorised agency
    • Anti-flammable refrigerants with IEC/EN/UL 60335-2-40 (Annexe JJ) certificate by an authorised agency
    • Digital customer experience for technical documents
    Dimensions

    (1)
    Minimum electrical clearance

    LC1

    D40A…D65A

    a

    55

    b1

    with LA4 D●2

    –

    with LA4 DB3 or LAD 4BB3

    136

    with LA4 DF, DT

    157

    with LA4 DM, DW, DL

    166

    c

    without cover or add-on blocks

    118

    with cover, without add-on blocks

    120

    c1

    with LAD N (1 contact)

    –

    with LAD N or C (2 or 4 contacts)

    150

    c2

    with LA6 DK10, LAD 6DK

    163

    c3

    with LAD T, R, S

    171

    with LAD T, R, S and sealing cover

    175

     

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Contactor, TeSys Deca, 3P(3NO), AC-3/AC-3e, <=440V, 32A, 230V AC 50/60Hz Coil, Screw Clamp Terminals

    0 out of 5
    ₦0

    TeSys D contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). It provides a 110V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), and connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

    • New modern look & feel of all machines
    • Easier to install and operate with multi-standard screws
    • Improved fire resistance with IEC 60335-1(Clause 30.2) certificate by authorised agency
    • Anti-flammable refrigerants with IEC/EN/UL 60335-2-40(Annexe JJ) certificate by an authorised agency
    • Digital customer experience for technical documents

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Electric Contactor, TeSys Deca, 3P (3 NO), AC-3/AC-3e, <=400V, 50A, 220V AC 50/60Hz Coil, Screw Clamp Terminals

    0 out of 5
    ₦0

    Description

    TeSys D contactor, 3 poles (3NO), for motor control applications up to 40A/440V AC-3/3e (18.5kW@400V). It provides a 230V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connection by EverLink BTR screw connectors, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (55mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
    • New modern look & feel of all machines
    • Easier to install and operate with multi-standard screws
    • Improved fire resistance with IEC 60335-1(Clause 30.2) certificate by authorised agency
    • Anti-flammable refrigerants with IEC/EN/UL 60335-2-40(Annexe JJ) certificate by an authorised agency
    • Digital customer experience for technical documents

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Soft Starter for an Asynchronous Motor, Altistart 22, Control 230V, 230 to 440V, 7.5 to 15kW

    0 out of 5
    ₦0

    Description

    This soft starter can feed 3-phase asynchronous motors in a supply line or a delta connection. It has a rating of 32A and 230V to 440V, a rated power up to 15kW (400V to 440V in supply line) and up to 22kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machine. It features an Integrated bypass, which reduces noise and decreases heat dissipation. Compatibility with the SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It providesa  smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
    EAN Code: 3606480167195
    • Provide a smooth start, avoiding mechanical stresses and extending their service life
    • Reduce hearing discomfort for operators on the workfloor
    • Slim form factor improves versatility
    • Less cost to stock spares
    • Overcome difficult or high-torque starts

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Soft Starter for Asynchronous Motor, Altistart 01, ATS01, 12A, 380 to 415V, 5.5kW

    0 out of 5
    ₦0

    Description

    This soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 47A and 230V to 440V, a rated power up to 22kW (400V to 440V in supply line) and up to 45kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

    • Product availability: Non-Stock – Not normally stocked in distribution facility
    • Provides smooth starting for your pumps, fans, compressors and machinery
    • Avoid mechanical stresses and extend their service life
    • Progressive start limits the starting and stopping noise of motors
    • Reduce hearing discomfort for operators on the workfloor
    • One of the smallest soft starters on the market; it can be installed nearly everywhere

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Soft Starter for Asynchronous Motor, Altistart 01, ATS01, 32A, 380 to 415V, 15kW

    0 out of 5
    ₦0

    Description

    This Altistart 01 soft starter is DIN rail-mounted and can feed 3-phase asynchronous motors with a rating up to 32A. This Altistart 01 can be used for a motor rated power up to 7.5kW for 3-phase (380V to 415V AC). This DIN rail-mounted soft starter is designed to enable a smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, which makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, which reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides a smooth start for your machinery, avoiding mechanical stresses and extending its service life.
    • Provides a smooth start for your pumps, fans, compressors and machinery
    • Avoid mechanical stresses and extend their service life
    • Progressive start limits the starting and stopping noise of motors
    • Reduce hearing discomfort for operators on the workfloor
    • One of the smallest soft starters on the market, it can be installed nearly everywhere

    Product Datasheet

    Instruction sheet

    Environmental Data Explained

    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Soft Starter for Asynchronous Motor, Altistart 22, control 230V, 230 to 440V, 11 to 22kW

    0 out of 5
    ₦0

    Description

    Soft Starter for an Asynchronous Motor, Altistart 22, control 230V, 230 to 440V, 11 to 22kW

    This soft starter can feed 3-phase asynchronous motors in a supply line or delta connection. It has a rating of 47A and 230V to 440V, a rated power up to 22kW (400V to 440V in supply line) and up to 45kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

    • Provide a smooth start, avoiding mechanical stresses and extending their service life
    • Reduce hearing discomfort for operators on the workfloor
    • Slim form factor improves versatility
    • Less cost to stock spares
    • Overcome difficult or high-torque starts

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Soft Starter for Asynchronous Motor, Altistart 22, Control 230V, 230 to 440V, 30 to 55kW

    0 out of 5
    ₦0

    Description

    This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 110A and 230V to 440V, a rated power up to 55kW (400V to 440V in supply line) and up to 90kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

    • Product availability: Non-Stock – Not normally stocked in distribution facility
    • Provides smooth starting for your pumps, fans, compressors and machinery
    • Avoid mechanical stresses and extend their service life
    • Progressive start limits the starting and stopping noise of motors
    • Reduce hearing discomfort for operators on the workfloor
    • One of the smallest soft starters on the market; it can be installed nearly everywhere

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Soft Starter for Asynchronous Motor, Altistart 22, Control 230V, 230 to 440V, 45 to 90kW

    0 out of 5
    ₦0

    Description

    This Altistart 22 soft starter can feed 3-phase asynchronous motors in a supply line or a delta connection. It has a rating of 170A and 230V to 440V, a rated power up to 90kW (400V to 440V in supply line) and up to 132kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machine. It features an Integrated bypass, which reduces noise and decreases heat dissipation. Compatibility with the SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides a smooth start for your machinery, avoiding mechanical stresses and extending its service life.

    EAN Code: 3606480167263
    • Provide a smooth start, avoiding mechanical stresses and extending their service life
    • Reduce hearing discomfort for operators on the workfloor
    • Slim form factor improves versatility
    • Less cost to stock spares
    • Overcome difficult or high-torque starts

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider TeSys D contactor, 3P(3 NO), AC-3, <= 440 V 9 A, 110 VAC Coil

    0 out of 5
    ₦0

    TeSys D contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). It provides a 110V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), and connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

    • New modern look & feel of all machines
    • Easier to install and operate with multi-standard screws
    • Improved fire resistance with IEC 60335-1(Clause 30.2) certificate by authorised agency
    • Anti-flammable refrigerants with IEC/EN/UL 60335-2-40(Annexe JJ) certificate by an authorised agency
    • Digital customer experience for technical documents

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Variable Speed Drive ATV310. 4 kW. 5.5 hp. 380…460 V. 3Phase

    0 out of 5
    ₦0

    Variable Speed Drive ATV310. 4 kW. 5.5 hp. 380…460 V. 3 Phase

    This Easy Altivar 310 drive is a frequency inverter for three-phase asynchronous motors. Its protection index is IP20. It works at a rated power up to HD 4kW/5HP or ND 5.5kW/7.5HP, and a rated voltage from 380V to 460V AC. Its compact size, robust design, and ease of installation, based on the principle of plug and play, and its integrated functions make it particularly suitable for applications involving industrial machines and certain consumer machines. It offers high readability of key parameters thanks to a bright LED 4-digit display. Underload and overload detection help to protect your installation. It weighs 1.8kg and its dimensions are 140mm wide, 184mm high, and 151mm deep. This drive incorporates functions that are suitable for the most common applications, including textile machines, machine tools, wood-making machines, material handling, packaging and printing machines, and ceramic machines.

    • Meet the requirements of directives regarding the protection of the environment (RoHS, WEEE)
    • Designed with an increased adaptability to motors and tough loads
    • Easy to integrate in system
    • Easy to install
    • Easy to commission

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Variable Speed Drive ATV310. 5.5 kW. 7.5 hp. 380…460 V. 3phase

    0 out of 5
    ₦0

    Variable Speed Drive ATV310. 4 kW. 5.5 hp. 380…460 V. 3 Phase

    This Easy Altivar 310 drive is a frequency inverter for three-phase asynchronous motors. Its protection index is IP20. It works at a rated power up to HD 5.5kW/7.5HP or ND 7.5kW/10HP, and a rated voltage from 380V to 460V AC. Its compact size, robust design and ease of installation, based on the principle of plug and play and its integrated functions make it particularly suitable for applications involving industrial machines and certain consumer machines. It offers high readability of key parameters thanks to a bright LED 4-digit display. Underload and overload detection help to protect your installation. It weighs 1.8kg and its dimensions are, 140mm wide, 184mm high, 151mm deep. This drive incorporates functions that are suitable for the most common applications, including textile machine, machine tools, wood making machine, material handling, packaging and printing machines, ceramic machine.

    • Meet the requirements of directives regarding the protection of the environment (RoHS, WEEE)
    • Designed with an increased adaptability to motors and tough loads
    • Easy to integrate in system
    • Easy to install
    • Easy to commission

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Schneider Variable Speed Drive, Easy Altivar 310, 2.2kW, 3hp, 380 to 460V, 3 phase, without filter

    0 out of 5
    ₦0

    Variable Speed Drive, Easy Altivar 310, 2.2kW, 3hp, 380 to 460V, 3 phase, without filter

    This Easy Altivar 310 drive is a frequency inverter for three-phase asynchronous motors. Its protection index is IP20. It works at a rated power up to 2.2kW/3HP, and a rated voltage from 380V to 460V AC. Its compact size, robust design, and ease of installation, based on the principle of plug and play, and its integrated functions make it particularly suitable for applications involving industrial machines and certain consumer machines. It offers high readability of key parameters thanks to a bright LED 4-digit display. Underload and overload detection help to protect your installation. It weighs 1.1kg and its dimensions are 105mm wide, 143mm high, and 151mm deep. This drive incorporates functions that are suitable for the most common applications, including textile machines, machine tools, wood-making machines, material handling, packaging and printing machines, and ceramic machines.

    • Meet the requirements of directives regarding the protection of the environment (RoHS, WEEE)
    • Designed with an increased adaptability to motors and tough loads
    • Easy to integrate into the system
    • Easy to install
    • Easy to commission

    Environmental Data Explained
    How We Assess Product Sustainability

    Add to cartDone

  • Siemens Sirius 3RV2021-1AA20 Motor Protection Circuit Breaker Switch

    0 out of 5
    ₦0

     

     

    Add to cartDone

End of content

End of content